Lab.gruppen Lake LM 26 Operation Manual page 19

Signal Flow and Lake Processing
5.5.2 Frame and System Presets
This device allows the complete processor configuration to be stored as a Frame Preset on the
hardware unit itself. Presets can be recalled via the front panel (please refer section 6.10.6) to or via the
Lake Controller software (please refer to the Lake Controller Operation Manual.
A maximum of 100 Frame Presets can be stored on this device. The data within a Frame Preset includes the
configurations of both Modules in the Frame, including all levels, crossover, EQ, input mixer, output routing,
and all other Module, Frame and Group parameters. As Frame Presets are stored in the device, complete
processor configurations may be recalled without the need to connect the device to a PC.
Using the System Presets function in the Lake Controller, entire system configurations can be stored and
recalled across a network of LM 26, PLM, Mesa Quad EQ, Contour Pro 26, and Dolby Lake Processors. This
enables fast retrieval and switching of entire system configurations as minimal data is being sent between
the Controller and Processors.
13
LM 26 Operation Manual rev 1.1.8