Table of Contents
Advertisement
Front Panel Interface
6. Front Panel Interface
An overview of the front panel interface is provided in section 4.1. This chapter describes each cluster of
controls as shown in Figure 6-1.
6.1
Overview
The majority of LM 26 functions can be controlled and monitored via LCD display screen
buttons
buttons and metering LEDs.
The front panel has two basic modes: Meter Mode and Menu Mode.
▸
Meter Mode provides two views: Home View (default). To toggle these views, press the METER
button. Please refer to section 6.9 for further information on Meter Mode.
▸
Menu Mode provides various menus for viewing and editing parameters and is selected by pressing the
MENU button. Select the required submenu by pressing the associated button. Please refer to section
6.10 for further information on Menu Mode.
6.1.1
Warning, Fault and Mute Indications
Fault or warning conditions are indicated via the tricolor LEDs embedded in the dynamic function buttons; a
simultaneous description is shown adjacent to the button, on the LCD.
A full list, description and priority of the fault and warning indications is provided in section .
6.1.2
Highlighting a Module in the Lake Controller software via the LM 26
It is sometimes useful to identify which Module icon/s in the Lake Controller software are associated with a
particular hardware Frame. To highlight the module in the Lake Controller software:
14
LM 26 Operation Manual rev 1.1.8
Figure 6-1: Front Panel Interface
, rotary encoder
and the dedicated Module input
, function
and Module output
mute
Advertisement
Table of Contents
