Signal Flow and Lake Processing
5. Signal Flow and Lake Processing
5.1
Signal Flow
Figure 5-1 depicts the audio signal flow inside an LM 26. It is worth noting that this sophisticated device
provides five points in the signal chain where the signal level can be adjusted, muted or disconnected.
Important information regarding correct setting of the gain structure can be found in section 9.1.
5.1.1
Level Adjustments & Mute Points
Input Router Stage
Input Mixer Stage
Module Input Stage
Module Output Stage
Output Router Stage
10
LM 26 Operation Manual rev 1.1.8
Figure 5-1: Signal Flow Diagram (LM 26)
- Input selection and MUTE
- Router ON/OFF connection to mixer and gain settings
- Mute and gain settings
- Mute and gain settings
- Output ON/OFF routing connections