Welcome; Introduction; Additional Documentation - Lab.gruppen PLM series Quick Start Manual

4. Welcome

4. Welcome

4.1 Introduction

Thank you for choosing the Lab.gruppen PLM Series of Powered Loudspeaker Management systems for
your sound reinforcement needs. We are confident that you will be pleased with the performance, unique
features, configuration flexibility, reliability, and long-term durability offered by PLM Series products.
This document provides a brief introduction to the features and functionality of the PLM Series of Powered
Loudspeaker Management systems. Please read through thoroughly to become acquainted with the basic
configuration and control options available in PLM Series products. Control and editing features are acces-
sible either via the intuitive front panel interface or remotely with the included Lake Controller software
package.
In the following sections you'll find the basic information needed to safely install a PLM system and place
it in service. We do, however, highly recommend reading through all of the product documentation on the
included CD-ROM in their entirety. As you become thoroughly familiar with all aspects of the PLM Series,
you may learn about features and options that will affect your choices of operational modes or loudspeaker
system configurations.
The Lab.gruppen PLM Series incorporates proven Lake Processor technology and expands upon it, provid-
ing a suite of load verification and performance monitoring features. The power output section builds on
the foundation of the road-tested FP+ and legendary fP Series, providing the same powerful, tight bass
and transparent high frequency response. In addition, the PLM Series establishes new benchmarks for
high power and channel density in tandem with digital signal processing, system management, and unique
protection features.
The Lake Controller software contains system configuration, control, and monitoring features not available in
any other product. The key to these features is the LoadLibrary™, a comprehensive database that provides
a unique Fingerprint (load characteristic) for each loudspeaker model in the system. Using this data and
on-board DSP, LoadSmart™ then compares predicted response with actual system performance response
by applying a brief test signal. Any potential problems are identified instantly. During system use, Speaker-
Safe™ monitors driver performance in real time to avoid power compression and provide detailed critical
information about system-wide driver performance.
Thank you again for placing your confidence in Lab.gruppen.

4.2 Additional documentation

This document, the PLM Series Quick Start and Field Reference Guide, serves as a basic introduction to
installation and operation of PLM Series Powered Loudspeaker Management Systems. More detailed
information is available in the comprehensive PLM Series Operation Manual.
Also, if you intend to use the PLM Series unit(s) as part of networked systems, or access monitoring and
control features via the Lake Controller software application, then you may need to refer to the following
complementary documents. All are available on the included CD-ROM or online as noted.
7
PLM Series Quick Start and Field Reference Guide rev 1.0.6