Recommended Network Cabling: Belden 1305A; Recommended Network Connectors: Lemo ® -Type Multipin Connector - Lab.gruppen PLM series Network Configuration Manual

6 NeTwORk HaRDwaRe ReCOMMeNDaTIONS
LinkSys waP200
• 802.3af compatible
• 256 bit secure encryption
• RangeBooster™ technology increases range and decreases
dead spots using standard antennae
• Good results even with obstructive objects in broadcast
path
• Accepts standards-based PoE (IEEE 802.3af) or external
DC power
• Manufacturer website:
www.linksys.com or www.3com.com
6.1.3 Recommended network cabling:
Belden 1305a
Although Belden 1305A is a stranded-type
cable providing high resilience against failure
from repetitive bending or stressing, it ex-
hibits a loss of 26.4 dB instead of the 24
dB that is stated in the Cat-5e requirements. This
limits the recommended length to 90.9 m. Please
be aware that Lab.gruppen has not verified perfor-
mance at the maximum length.
Belden 1305a Cat-6 cable
4 pair / 8 conductor
•
Wire pairs are glued together to resist bend failure
•
Approved for both indoor and outdoor applications
•
Operating temperature of -20 C to +60 C
•
Manufacturer website: www.belden.com
•
6.1.4 Recommended network connectors:
LEMO-type multipin connector
The Neutrik EtherConRJ45 connector has come into
wide use in the touring business. However, Neutrik
14 PLM Series Network Configuration Guide
only guarantees the performance of the EtherCon
for 1000 mating cycles.
In order to provide a more reliable long-term solu-
tion, Lab.gruppen recommends the circular metal
push-pull connector from LEMO
are rated to withstand 5000 mating cycles, and are
available in both crimped and soldered versions.
LEMO connectors
Rated at 5000 insertions
•
Operational from -50 C to + 200 C
•
Nickel / brass construction
•
Manufacturer website: www.lemo.com
•
Recommended part numbers:
•
• Female panel connector
• Male cable connector
• Female panel connector
In order to use the LEMO connector one
must use the following pin out. Pins 4 and
6 are "shifted". If the connector is made
with a pin-to-pin wiring configuration, the
connection will work for 100BASE-TX, but not for
1000BASE-T.
RJ-45 LEMO
1 1 orange/white
2 2 orange
3 3 green/white
4 6 blue
5 5 blue/white
6 4 green
7 7 brown/white
8 8 brown
. These connectors
®
PEG.2K.308.CYMC75
FGG.2K.308.CYCC75Z
PHG.2K.308.CYMC75Z