Default Configuration; Data Collection Settings - Intermec CN50 User Manual

Appendix A — Specifications and Default Settings
EA11 Typical Reading Distances
Symbology
Code 39
UPC/EAN
Data Matrix
PDF417

Default Configuration

Data Collection Settings

118
Density
0.125 mm (5 mil)
0.20 mm (8 mil)
0.25 mm (10 mil)
0.50 mm (20 mil)
1 mm (40 mil)
0.33 mm (13 mils)
0.191 mm (7.5 mils)
0.254 mm (10 mils)
0.381 mm (15 mils)
0.168 mm (6.6 mils)
0.254 mm (10 mils)
0.381 mm (15 mils)
The following tables list the default values of the configuration
commands supported on the CN50. If you restore to factory default
settings, the CN50 uses these values.
The commands are grouped by function and reflect the organization
of Intermec Settings. You can configure your CN50 with Intermec
Settings from the SmartSystems Foundation console. For detailed
information on most of the commands, see the
Command Reference
Use data collection settings to configure the imager and to configure
the bar codes that you want the imager to be able to read.
Symbology Settings
Symbology
AustraliaPost
Aztec
BPO
CanadaPost
ChinaPost
CN50 Mobile Computer for Windows Embedded Handheld 6.5 User Manual
Minimum Distance
7.2 cm (2.8 in)
3.8 cm (1.5 in)
3.4 cm (1.3 in)
5 cm (2 in)
8 cm (3.1 in)
5 cm (2 in)
6.3 cm (2.5 in)
4.8 cm (1.9 in)
*
6.25 cm (2.46 in)
4.5 cm (1.8 in)
4 cm (1.6 in)
Manual.
Default Value
Disable
Disable
Disable
Disable
Disable
Maximum Distance
13.1 cm (5.1 in)
22.5 cm (8.8 in)
27 cm (10.5 in)
44 cm (17.2 in)
83 cm (32.4 in)
32 cm (12.5 in)
17.3 cm (6.7 in)
22 cm (8.6 in)
29 cm (11.3 in)
15.4 cm (6 in)
23 cm (9 in)
37 cm (14.4 in)
Intermec Settings