Wiring Connection; Part List For Installation - Kenwood KDC-U556BT Instruction Manual

Wiring connection

MIC (Microphone input
terminal) (➜ 8)
Antenna terminal
White
To front speaker (left)
White/Black
Gray
To front speaker (right)
Gray/Black
Green
To rear speaker (left)
Green/Black
Purple
To rear speaker (right)
Purple/Black
Light blue/yellow
(Steering remote control wire)
Blue
(Antenna control wire)
Blue/White
(Power control wire)
Brown
(Mute control wire)
Red (Ignition wire)
Yellow (Battery wire)
Black (Ground wire)
Subwoofer output
Front output
R L
Rear output
If no connections are made, do not let the wire come out from the tab.
STEERING WHEEL
REMOTE INPUT
To the steering wheel remote control adapter
REMOTE CONT
To the antenna control terminal in the vehicle
ANT CONT
To the power control terminal when using the optional power
amplifier, or to the antenna control terminal in the vehicle.
P. CONT
To the terminal that is grounded when either the telephone
rings or during conversation. (To connect the Kenwood
MUTE
navigation system, refer your navigation manual.)
Fuse (10 A)
Car fuse box
To the metallic body or chassis of the car

Part list for installation

A Faceplate
B Mounting sleeve
C Trim plate
D Wiring harness
E Extraction key
Ignition switch
F Flat head screw
Car fuse
G Round head screw
box
Battery
( ×1 )
( ×1 )
( ×1 )
( ×1 )
( ×2 )
( ×4 )
( ×4 )
ENGLISH | 17