Kenwood KDC-U556BT Instruction Manual page 10

BLUETOOTH®
SETTINGS
PAIRING PHONE SELECT : Select the phone or audio device to connect or disconnect.
AUDIO SELECT
DEVICE DELETE 1 Turn the volume knob to select a device to delete, then press the knob.
2 Turn the volume knob to select [YES] or [NO], then press the knob.
TRANSFER PB* : "DL PB " appears and transfer the phonebook of the connected phone to this unit manually.
DETAILED SET PIN CODE EDIT Changes the PIN code (up to 8 digits).
(0000)
1 Turn the volume knob to select a number.
2 Press 4 / ¢ to move the entry position.
3 Press the volume knob to confirm.
AUTO ANSWER 1 — 99 (8): The unit answers incoming calls automatically in the selected time. ;
OFF: Cancels.
RECONNECT ON: The unit automatically reconnect when the Bluetooth device is within range. ;
OFF: Cancels.
AUTO PAIRING ON: The unit automatically pair supported Bluetooth device (iPhone/iPod touch)
when it is connected through USB input terminal. Depending on the iOS version of the
connected iPhone/iPod touch, this function may not work. ; OFF: Cancels.
BT HF/AUDIO FRONT: Ouputs audio from the front left and right speakers. ; ALL: Outputs audio from
all the speakers.
CALL BEEP ON: The unit beeps when there is an incoming call. ; OFF: Cancels.
BT F/W UPDATE BT F/W XX.XX: YES: Updates all the Bluetooth settings (including stored pairing,
phonebook, and etc.). ; NO: Cancels.
MIC GAIN –20 — +8 (0): The sensitivity of the microphone increases as the number increased.
ECHO LEVEL 1 — 10 (4): Adjust the echo cancellation delay time until the least echo is being heard
during a phone conversation.
MIC SELECT IN: Use the built-in microphone. (➜ 8) ; EXT: Use the external microphone.
* Selectable only when the connected phone supports OPP.
10
Repeat steps 1 and 2 until you finish entering the PIN code.
Default: XX
Alphabet Search
You can search through the contacts quickly according to the
first letter (A to Z), number (0 to 9), or symbol.
• The second alphabet of the contact will be searched if the
first alphabet does not exist.
1
Press to enter Bluetooth mode.
2
Turn the volume knob to select [PHONE BOOK], then press
the knob.
3
Press to enter alphabet search mode.
The first menu (ABCDEFGHIJK) appears. To go to the other
menu (LMNOPQRSTUV or WXYZ1 ), press 4 / ¢.
4
Turn the volume knob to select the desired first letter,
then press the knob.
• To search with numbers, select "1".
• To search with symbols, select " ".
5
Turn the volume knob to select a name, then press the
knob.
6
Turn the volume knob to select a phone number, then
press the knob to call.
• To return to the previous hierarchy, press
• Contacts are categorized as: GE (general), HM (home), OF
(office), MO (mobile), OT (others).
• This unit can display only non-accent letters. (Accent letters
such as "Ú" is shown as "U".)
.