Removing The Unit; Wiring Connection - Kenwood KDC-BT960DAB Quick Start Manual

Removing the unit

Wiring connection

Fuse (10 A)
STEERING WHEEL
REMOTE INPUT
REMOTE CONT
ANT CONT
*2
P. CONT
MUTE
ISO connectors
KDC-BT960DAB_E_B5K-0893-00_EN_1st Draft.indd 3 KDC-BT960DAB_E_B5K-0893-00_EN_1st Draft.indd 3
a Light blue/yellow: To the steering wheel remote control adapter
b Blue/white: To the power control terminal when using the optional power
DAB antenna jack
c Brown: Connect to the device equipped with muting feature to mute this unit
d Yellow: Battery wire
e Red: Ignition wire
Antenna terminal
f Red: A7 from ISO connector
g Yellow: A4 from ISO connector
Pin
If no connections are made, do
A4
not let the wire come out from
A5
the tab.
A7
A8
B1, B2
B3, B4
NOTE: Total output for Blue/White wire
B5, B6
(*1) + (*2) is 12 V 350 mA
B7, B8
Part list (supplied)
(A) Faceplate (×1)
(B) Trim plate (×1)
(C) Mounting sleeve (×1)
(D) Wiring harness (×1)
(E) Extraction key (×2)
amplifier or to the antenna control terminal in the vehicle
Color and function (for ISO connectors)
Yellow
Blue/White*1
Red
Black
Purple ], Purple/black [
Gray ], Gray/black [
White ], White/black [
Green ], Green/black [
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
: Battery
: Power control
: Ignition (ACC)
: Earth (ground) connection
: Rear speaker (right)
: Front speaker (right)
: Front speaker (left)
: Rear speaker (left)
3
8/16/2021 9:53:22 AM 8/16/2021 9:53:22 AM