Features; Overview - Fujitsu D2239 Technical Manual

3

Features

3.1

Overview

The system board D2239 is available in two versions:
– SCSI version; you will find on the system board a SCSI controller and one
SCSI connector
– SATA version; four SATA connectors and one SATA LED connector
Processors
®
– 1 x Intel Pentium
– 1 processor socket LGA775 for Intel
with 533/800 MT/s (133/200 MHz) front side bus
Main Memory
– 4 slots for main memory DDR2 533/667 MHz (unbuffered),
SDRAM memory modules with 512 MB up to 8 Gbyte
– maximum 8 Gbyte of memory
– minimum 512 MB
– ECC multiple bit error detection and single bit error correction
Chips on the system board
®
– Intel iE7230 chipset
– ATI VGA controller (RAGE XL)
®
– Intel i82801 ICH7R chipset
®
– Intel PXH-V PCI-X bridge
– Super-I/O controller (SMSC DME1737)
– 1 x GBit LAN controller (Broadcom BCM5721)
– SCSI controller (LSI 53C1020A) with IME functionality (only SCSI version)
– Flash EPROM for:
– BIOS
– BMC
– BMC controller
– ADM1026 thermal and system management controller
D2239 (TX150 S4)
® ®
4 or Pentium D processor
Technical Manual
® ®
Pentium 4 or Pentium
®
D processor
13