Fujitsu D2779 Technical Manual page 18

System board d2779 for primergy tx100 s2
Table of Contents

Advertisement

Overview
Features
PCI / PCIe Slots
– 1x PCI 3.0 (32 bit / 33 MHz), support of 3.3 V and 3.3 V/5 V cards; no
support of 5 V cards
– 2x PCI Express 2.0 slots (x8)
– 1x PCI Express 2.0 slot (x4)
LAN Gigabit Ethernet Controller
®
– GbE Ethernet PHY Intel
82578DM
– 10/100/1000 Base-T IEEE 802.3 MAC
– 4 KB Jumbo Frames
– WOL by Magic-Packet™, link status change and interesting packet
– PXE 2.0, iSCSI Boot remote boot support
– IPV6 Header Offloading
– Receive Side Scaling
– Interface: PCI-Express x1 based
BIOS features
– System and BIOS password
– Harddisk password
– Recovery BIOS support
– Boot sequential control for IDE drives
– Serial access protection
– Boot sector virus warning
– SPD EEPROM write protection against virus
– Wake on LAN
– USB voltage short detection
– Advanced fan control
Environmental protection
– Battery on socket for recycling
– RoHS compliant (1.1.2006)
Power management
– ACPI (states S0, S4, S5)
– ACPI 2.0
– 3.3 V auxiliary power on the PCI/PCIe bus slots
– On/Off/Sleep/Wake by power button
– On/Off software
18
Technical Manual
D2779 (TX100 S2)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents