Screen Resolution; Temperature/System Monitoring - Fujitsu D2619 Technical Manual

Features
3.4

Screen resolution

Depending on the operating system used the screen resolutions in the following
table refer to the graphic controller on the system board. The graphic controller
is integrated in the iRMC (integrated Remote Management Controller).
Screen resolution
640 x 480 Hz
800 x 600 Hz
1024 x 768 Hz
1152 x 864 Hz
1280 x 1024 Hz
1600 x 1200 Hz
If you are using an external graphic controller, you will find details of supported
screen resolutions in the documentation supplied with the graphic controller.
3.5

Temperature/system monitoring

Temperature and system monitoring aim to reliably protect the computer
hardware against damage caused by overheating. In addition, any unnecessary
noise is also prevented by reducing the fan speed, and information is provided
about the system status.
The temperature and system monitoring are controlled by the iRMC S2
(integrated Remote Management Controller).
The following functions are supported:
Temperature monitoring
Measurement of the processor and the system internal temperature by an
onboard temperature sensor, measurement of the ambient temperature by a
2
I C temperature sensor.
Fan monitoring
The CPU, power supply unit and system fans are monitored. Fans that are no
longer available, blocked or sticky fans are detected.
D2619 (RX/TX300 S5)
Max. color depth
32 Bit
32 Bit
32 Bit
16 Bit
24 Bit
16 Bit
Technical Manual
Screen resolution
Max. frequency
85 Hz
85 Hz
75 Hz
60 Hz
60 Hz
60 Hz
25