Screen Resolution; Temperature / System Monitoring - Fujitsu D2619-N Technical Manual

For primergy rx/tx300 s6
Table of Contents

Advertisement

Features
3.4

Screen resolution

Depending on the operating system used the screen resolutions in the following
table refer to the graphic controller on the system board. The graphic controller
is integrated in the iRMC S2 (integrated Remote Management Controller).
Screen resolution
(pixel)
640x480
800x600
1024x768
1152x864
1280x1024
1600x1200
If you are using an external graphic controller, you will find details of supported
screen resolutions in the operating manual or technical manual supplied with
the graphic controller.
3.5

Temperature / system monitoring

Temperature and system monitoring aim to reliably protect the computer
hardware against damage caused by overheating. In addition, any unnecessary
noise is also prevented by reducing the fan speed, and information is provided
about the system status.
The temperature and system monitoring are controlled by the iRMC S2
(integrated Remote Management Controller).
The following functions are supported:
Temperature monitoring
Measurement of the processor and the system internal temperature by an
onboard temperature sensor, measurement of the ambient temperature by a
2
I
C temperature sensor.
D2619-N (RX/TX300 S6)
Maximum refresh
rate (Hz)
85
85
75
60
60
60
Technical Manual
Screen resolution
Max. number of colours
32 bit
32 bit
32 bit
16 bit
24 bit
16 bit
27

Advertisement

Table of Contents
loading

Table of Contents