Fujitsu D2619 Technical Manual page 28

LEDs
The LEDs have the following meaning:
LED LED
A Identification
B Customer Self
Service
C Global Error LED
D LAN activity
E LAN speed
F Controller
G CPU
H Memory Module
I PS CTRL OK
PS CTRL ERROR orange
K
L Main Power
M Aux Power
N Board Error
O iRMC
By pressing the Indicate CSS button (INDICATE CSS BUTTON near the DIMM
slots for CPU2) the defective component can also be indicated in the power-off
condition (power supply plug disconnected).
28
Indicator Meaning
blue server is identified via ServerView
on indicates a prefailure
yellow flashing indicates a failure
red indicates a prefailure
red flashing indicates a failure. Reasons for a
failure may be:
- overheating of one of the sensors
- sensor defect
- fan defect
- CPU error
- software detected an error
green connection available
green flashing LAN transfer
off 10 Mbit/s
green 100 Mbit/s
yellow 1000 Mbit/s
orange controller failure
orange CPU failure
orange memory failure
green power supply ok
power supply failure
green main power is ok
yellow auxiliary power is ok
red system board is faulty
green flashing iRMC (integrated Remote
Management Controller) is okay
Technical Manual
Features
D2619 (RX/TX300 S5)