Screen Resolution - Fujitsu D2785 Technical Manual

Screen resolution

The following interrupt signals are used in the system:
Slot/device
VGA
LAN
Slot 1
Slot 2
Slot 3
Slot 4
Assignment of the PCI interrupts
If you select Auto in the BIOS setup, the interrupts are assigned automatically
and no further settings are required.
3.4 Screen resolution
Depending on the operating system used the screen resolutions in the following
table refer to the Matrox graphic controller on the system board. The Matrox
graphic controller is integrated in iRMC S2 (integrated Remote Management
Controller).
Screen resolution Maximal refresh rate (Hz) Maximal colour depth
640x480
800x600
1024x768
1152x864
1280x1024
If you are using a different graphic controller, you will find details of supported
screen resolutions in the documentation supplied with the graphic controller.
18
Property
iRMC S2 graphic Int B
Intel 82567 LM
PCIe x8
PCIe x8
PCI (33 MHz)
PCIe x8
85
85
85
75
60
Technical Manual
Interrupt signal
Int A
Int A, B, C, D
Int A, B, C, D
Int A, B, C, D
Int A, B, C, D
32 Bit
32 Bit
32 Bit
24 Bit
24 Bit
Features
D2785 (TX120 S2)