NordicTrack NTEL09109.7 User Manual page 18

HOW TO USE THE IFIT TRAINING MODE
The optional iFit Live module allows your console to
communicate with your wireless network and unlocks
exciting new features. For example, you can download
personalized workouts and track and analyze your
workout results on the iFit Live website. To purchase
an iFit Live module at any time, go to www.iFit.com
or call the telephone number on the front cover of
this manual.
To select the iFit training mode, press the Menu button
and then press the Increase and Decrease buttons
next to the Enter button and highlight IFIT TRAINING.
Then, press the Enter button. For more informa-
tion about the iFit training mode, go to www.iFit.
com. Note: To use an iFit Live module, you must have
access to a computer with an internet connection and
a USB port. You must also have your own wireless net-
work including an 802.11b router with SSID broadcast
enabled (hidden networks are not supported).
IMPORTANT: To satisfy exposure compliance
requirements, the antenna and transmitter in the
iFit Live module must be at least 8 in. (20 cm) from
all persons and must not be near or connected to
any other antenna or transmitter.
HOW TO USE THE SOUND SYSTEM
To play music or audio books through the console
sound system while you exercise, plug your audio
cable into the jack on the side of the console and into a
jack on your MP3 player or CD player; make sure that
your audio cable is fully plugged in.
Next, press the play button on your MP3 player or
CD player. Adjust the volume level using the volume
control on your MP3 player or CD player or press the
Volume Increase and Decrease buttons on the
console.
HOW TO USE THE INFORMATION MODE
The console features an information mode that allows
you to view usage information and to adjust the con-
trast level of the displays.
To select the information mode, press and hold down
the Display button for a few seconds until the informa-
tion mode appears in the display.
The display will show the
total number (in thousands)
of strides that have been
pedaled on the elliptical.
The display will also show
the total number of hours
that the elliptical has been
used.
The currently selected contrast level will also appear
in the display. Press the Increase and Decrease but-
tons next to the Enter button repeatedly to select the
desired contrast level.
Press the Display button to save the contrast level
setting.
The display may also indicate when an accessory is
connected to the console. If the iFit Live module is con-
nected, the display will show the words WIFI STATUS.
If a USB device is connected, the display will show the
words USB STATUS. If no accessory is connected, the
display will show the words NO MODULE DETECTED.
Press the Display button to exit the information mode.
18