Cleaning Inside The Scanner; Cleaning The Rollers, Sensors And Imaging Guides - Kodak Sidekick 1400u User Manual

Cleaning inside the
scanner
Cleaning the rollers,
sensors and imaging
guides
A-61676 June 2010
Clean inside the scanner at least once a week or after 20,000 sheets
have been scanned, whichever comes first.
NOTE: To determine the number of sheets scanned, use the
Utility. See the Chapter 5, User Utility for more information.
• Be sure the documents you are scanning are clean to minimize
frequent scanner dirt and dust build-up.
• When cleaning the rollers, hold the roller to prevent it from rotating,
then horizontally wipe the roller from side to side. Turn the roller as
you continue to wipe until the entire roller has been cleaned.
• If black or white lines appear on the scanned images, clean the
imaging guides as described in the next section.
• If paper jamming, marking, or multi-sheet feeding occurs frequently
even after cleaning, you may need to change the rollers as described
in the section entitled, "Replacing consumables" later in this chapter.
1. Turn the scanner off.
2. Push the ADF door release button to open the ADF cover.
User
ADF door
release
button
4-3