To Empty Tank-In-Tank - Bissell PowerWash Deluxe User Manual

When It's Time To Empty The Tank-in-Tank
NOTE: Remove the Tank-in-Tank, following steps 1
and 2 on page 7.
Carry the Tank-in-Tank, like a bucket, to the
1.
sink. Remove Tank Lid. Pour out dirty water.
After each use, remove and rinse the Lint
2.
Screen located on the Tank Lid.
Refill with cleaning solution and clean hand hot
3.
tap water—follow steps 4 through 5 on page 7.
When the cleaning job is complete, rinse
4.
out the Tank-in-Tank by running clean water
between the Bladder and the Tank.
Return the Tank-in-Tank to the machine, follow
5.
step 5 on page 7.
Refer to the Maintenance section on page 14
6.
for final cleanup.
ReadyTool™ Dial
This provides above floor or upholstery cleaning with the
turn of a dial. For carpet/floor cleaning make sure the dial
is set to FLOOR CLEANING. Just select your cleaning tool,
attach it to the Flex Hose, and the PowerWash Deluxe is
ready to clean upholstery, fabrics and more*.
* Set the ReadyTools dial to FLOOR CLEANING when cleaning
carpets and bare floors or set it to TOOLS/PRETREAT when
using the Flex Hose attachments or for pre-treating floors.
8
ug310-5806_1694E_804.indd 8 ug310-5806_1694E_804.indd 8
Remove Tank Lid.
A.
Remove Lint Screen and rinse under tap.
B.
Remove any debris caught in lint screen.
Re-insert Lint Screen on Tank Lid. The
C.
screen will click into place.
Replace Tank Lid.
D.
1
2
Lint Screen
5
Latched
Tip:
Tip:
A special red float device
Thorough
in the Tank will cause the
vacuuming before
cleaner to stop removing
deep cleaning
solution from the carpet
will prevent early
and the motor sound will
clogging of the
rise in pitch to let you
lint trap.
know the dirty water tank
is full.
3/29/06 3:42:59 PM 3/29/06 3:42:59 PM