Table of Contents
Advertisement
Cleaning Bare Floors Continued
Machine Preparation
Set up machine following instructions in the
1.
Features section on pages 6-8. Be sure to
thoroughly rinse out any remaining BISSELL
Advanced Deep Cleaning Formula from the
Tank-in-Tank to prevent slippery linoleum, vinyl,
and tile floors. Use BISSELL Floor Cleansing
Formula in the Tank-in-Tank.
Check ReadyTools dial - it should be set on
2.
FLOOR CLEANING .
Plug into a proper outlet and turn Power
3.
Switch ON.
Bare Floor Cleaning Technique
Slowly move the machine Nozzle with Bare
1.
Floor Tool forward and back over soiled surface
one time while pressing the trigger.
Caution: Do not over wet.
Repeat the motion without pressing the trigger
2.
using the Bare Floor Tool to squeegee and suc-
tion up the dirty water.
Repeat steps 1 and 2 backing along the exit
3.
path.
Allow about 30 minutes for the floor to dry
4.
completely.
When the cleaning job is complete refer to
5.
the Maintenance section on page 14-16 for
machine cleanup and storage instructions
To remove Bare Floor Tool gently bend long tab
6.
(right side) outward and pull tool down away
from Nozzle. Rinse thoroughly, dry and store.
ug310-5806_1694E_804.indd 13
ug310-5806_1694E_804.indd 13
13
3/29/06 3:43:01 PM
3/29/06 3:43:01 PM
Hide quick links:
Advertisement
Table of Contents
