Mounting The Side Input - Hitachi 32PD7800 User Manual

INSTALLATION INSTRUCTIONS (continued)

Mounting the Side Input

• With the speaker unit
1. Mount the side input into the speaker holder.
Hook the clamps (4 pieces) of the speaker holder into the holes as shown in the figure and pull them down until it sounds click.
Fasten the side input with the speaker holder by the screws.
Refer to 14 about the connection of side input.
See the below figure how to treat the cable.
Speaker holder
• Without the speaker unit
1. Attach the holder for the side input.
2. Mount the side input into the securing holder.
Fasten the side input with the speaker holder by the screws.
See the below figure how to treat the cable.
Side input
Screw x 1
Screw hole
Screw x 2
Screw hole
Side input
Clamp (32)
Side input Clamp (42, 37)
32 inch
Holder
Clamp (32)
Clamp (42, 37)
42 inch
37 inch
32 inch
Clamp (42, 37)
42 inch
37 inch
19