Table of Contents
Advertisement
OPERATING INSTRUCTIONS (continued)
Input Selection
Press the RGB/VIDEO button on the remote controller or the INPUT SELECT
button on the main unit to switch the input in the sequence of RGB1 -> RGB2 ->
VIDEO1 -> VIDEO2 -> RGB1.
• When the same signal is input to RGB1 and
RGB2, the phase may in some cases shift
slightly but this is not a malfunction. In such
case, readjust the PHASE of the one being
used.
Volume Adjustment
While the on-screen display system, EasyMenu (
remote controller VOLUME button
or
to adjust the sound volume.
• The adjustment status will be displayed as
guidance while you press these buttons.
• While the guidance is on display, press
or
to turn up the volume.
• While the guidance is on display, press
or
to turn down the volume.
• You can also adjust the sound volume setting
via the on-screen display system, EasyMenu
14
.
• The sound volume adjustment mode will exit when no keys are entered for 5 seconds. (The
adjustment status guidance will disappear automatically.)
Sound Mute
Press the remote controller MUTE button to mute the sound temporarily.
• When you press the button, [MUTE] (pink) and the
status of volume setting will be displayed in a
guidance image.
• While the sound is muted, press the
turn down the volume.
• While the sound is muted, press the
cancel the mute.
• You can also adjust the sound volume setting of the
mute via the on-screen display system, EasyMenu
.
14
Press the remote controller MUTE button once again and the mute will be canceled and
the guidance will change to VOLUME (blue), enabling the volume to be heard.
• When MUTE is used, the guide display will continue for 5 sec. and then turn off.
10
Remote
RGB1
controller
RGB/
VIDEO
RGB2
Main unit
VIDEO1 (composite or S input)
INPUT
SELECT
VIDEO2
) is not on display, press the
12
or
(or the main unit VOLUME button
Remote
controller
VOLUME
Main unit
VOLUME
Adjustment status guidance
Remote
controller
button to
MUTE
button to
(The display will turn to pink.)
(D-sub input)
(BNC input)
(COMPONENT input)
Sound volume setting
VOLUME
: 30
Sound volume setting
MUTE
: 30
Advertisement
Table of Contents
