Mounting The Side Input - Hitachi PW2 42PD7A10A User Manual

INSTALLATION INSTRUCTIONS (continued)

Mounting the Side Input

• With the speaker unit
1. Mount the side input into the speaker holder.
Hook the clamps (4 pieces) of the speaker holder into the holes as shown in the figure and pull them down until it sounds click.
Fasten the side input with the speaker holder by the screw.
Refer to 14 about the connection of side input.
See the below figure how to treat the cable.
Speaker holder
• Without the speaker unit
1. Attach the holder for the side input.
Screw x 2
Screw hole
2. Mount the side input into the securing holder.
Fasten the side input with the speaker holder by the screw.
See the below figure how to treat the cable.
Side input
Side input
Screw x 1
Screw hole
Holder
Clamp
Side input Clamp
NOTE
About the fixing screw for the Side Input
• The screw for fixation is attached on the holder with the tape as
shown below.
Clamp
Screw
19