Setup Menu (Rgb Mode: Rgb1 (Dvi-Pc), Rgb2 (Rgb)) - Hitachi 32PD7800 User Manual

Hitachi flat panel television user manual
Hide thumbs Also See for 32PD7800:
Table of Contents

Advertisement

OPERATING INSTRUCTIONS (continued)

SETUP MENU (RGB mode: RGB1 (DVI-PC), RGB2 (RGB))

Picture
Audio
Timer
Function
MENU
Setup
Language
Select
OK Set
Selected characters
Auto Adjust*
Moves the horizontal position
to left.
Horizontal Position
Moves down the vertical posi-
tion.
Vertical Position
Reduces the dot clock fre-
quency (shrinks the right side).
Horizontal Clock
Slows the dot clock phase
(shifts slightly to left).
Clock Phase
Reset
(off the function)
Input Level
Frequency Display
WVGA Type
WXGA Mode
Adjust
Pressing the OK button here,
Automatic regulation is started.
Moves the horizontal position
to right.
Moves up the vertical position.
Increases the dot clock fre-
quency (expands the right
side).
Advances the dot clock phase
(shifts slightly to right).
(waiting to reset)
0.7V
1.0V
Off
On
Off
On
Off
1280x768
1366x768
Setup
Auto Adjust
Adjust
Horizontal Position
0
Vertical Position
+ 31
Horizontal Clock
– 20
Clock Phase
10
Reset
Reset
Select
OK
Set
Return
Setup
Auto Adjust
Adjust
Horizontal Position
0
Vertical Position
+ 31
Horizontal Clock
– 20
Clock Phase
10
Reset
Reset
Select
OK
Set
Return
Setup
Input Level
0.7V
Frequency Display
Off
WVGA Type
Off
WXGA Mode
Off
Vertical Filter
On
Frequency Mode
Movie
RGB1
DVI-PC
RGB2
RGB
Select
Set
Return
Horizontal Position, Vertical Position, Horizontal Clock and Clock
Phase are adjusted automatically.
Adjust the left-side display position.
Screen display changes to Magenta color if beyond the available
range. (This function is only for RGB2. It's not available (grayed out)
for RGB1 (DVI-PC).)
Adjust the vertical display position.
Screen display changes to Magenta color if beyond the available
range. (This function is only for RGB2. It's not available (grayed out)
for RGB1 (DVI-PC).)
Adjust for maximum character clarity.
(This function is only for RGB2. It's not available (grayed out) for
RGB1 (DVI-PC).)
Adjust for clear character visibility.
(This function is only for RGB2. It's not available (grayed out) for
RGB1 (DVI-PC).)
The original factory settings for the items of this Menu page can be
restored by pressing the OK button.
Normally set to 0.7 V. If white is found to spread across the screen,
set to 1.0 V. (This is effective only for RGB2.)
Set this to Off if the frequency information of the Input Signal Screen
Display is not required.
This is only available for W-VGA signal.
When it is set to On, the display area mode can be selected Full or
Real. (With RGB1 INPUT, the screen remains the same. RGB2 (ANA-
LOG) INPUT only)
This is only available for W-XGA signal.
(RGB2 (ANALOG) INPUT only)
Horizontal Position
0
Next / Prev
Adjust
Return
Clock Phase
10
Next / Prev
Adjust
Return
Setup hint
37

Advertisement

Table of Contents
loading

This manual is also suitable for:

42pd7800

Table of Contents