Preparation And Simple User Guide - Brother MFC-9660 Owner's Manual

Preparation and Simple User Guide

Steps to prepare and use the machine simply
Follow the steps below to prepare and use the machine simply.
However, before you perform these steps, see Important Safety Information (page 146) and
Advice for Preparation and Simple User Guide. (page 3)
If you need further information, refer to BASIC FAX USE or ADVANCED FAX USE.
1 Read the Quick Setup Guide
Follow the instructions on the Brother Quick Setup Guide to set up the machine.
2 Setting the Document
I Documents must be between 14.8 and 21.6 cm wide, and 10 and 36 cm long. This machine
can only scan an image 20.7 cm wide, regardless of how wide the document is.
I Make sure you insert documents face down, top edge first.
I Adjust the paper guides to fit the width of your document.
I The Automatic Document Feeder can hold up to 30 pages, feeding each one individually through
the machine. Use standard (64 gsm~90 gsm) paper when using the Automatic Document Feeder;
if you're using heavier paper, feed each sheet individually to prevent paper jams.
• DO NOT use curled, wrinkled, folded, or ripped document, or document
• DO NOT use cardboard, newspaper, or fabric.
• Make sure documents written with ink are completely dry.
1
Paper Guides
Paper Guides
with staples, paper clips, paste, liquid paper or tape attached.
Approx. 1.3 cm