Entering System Setup; System Setup Options; System Setup Screens - Dell XPS 625 Service Manual

Back to Contents Page
System Setup
Dell™ XPS™ 625 Service Manual
Overview
Entering System Setup
System Setup Options
Boot Sequence
Overview
Use System Setup:
To change the system configuration information after you add, change, or remove any hardware in your computer.
l
To set or change a user-selectable option such as the user password.
l
To read the current amount of memory or set the type of hard drive installed.
l
Before you use System Setup, it is recommended that you write down the system setup screen information for future reference.
CAUTION: Do not change the settings in system setup unless you are an expert computer user. Certain changes can cause your computer to work
incorrectly.
Entering System Setup
1. Turn on (or restart) your computer.
2. When the DELL logo appears, press <F2> immediately.
NOTE: Keyboard failure may result when a key on the keyboard is held down for extended periods of time. To avoid possible keyboard failure,
press and release <F2> in even intervals until the system setup screen appears.
If you wait too long and the operating system logo appears, continue to wait until you see the Microsoft® Windows® desktop, then shut down your
computer and try again.

System Setup Screens

The System Setup screen displays current or changeable configuration information for your computer. Information on the screen is divided into five areas: the
menu field, the options list, the active options field, the help field, and key functions.
Menu — Appears on top of the System Setup window. This field provides a menu to access to the System Setup options. Press the left- and right-arrow keys
to navigate. As a Menu option is highlighted, the Options List lists the options that define the hardware installed on you computer.
Options List — Appears on the left side of the System
Setup window. The field lists features that define the
configuration of your computer, including installed
hardware, power conservation, and security features.
Scroll up and down the list with the up- and down-
arrow keys. As an option is highlighted, the Options
Field displays the option's current and available
settings.
Key Functions — Appears below the Options Field and lists keys and their functions within the active system setup field.
System Setup Options
NOTE: Depending on your computer and installed devices, the items listed in this section may not appear, or may not appear exactly as listed.
Main
Options Field — Appears on the right side of Options List
and contains information about each option listed in the
Options List. In this field you can view information about
your computer and make changes to your current settings.
Press <Enter> to make changes to your current settings.
Press <ESC> to return to the Options List.
NOTE: Not all settings listed in the Options Field are
changeable.
Help — Appears on the right side of
the System Setup window and
contains help information about the
option selected in Options List.