Dell XPS 625 Service Manual page 28

1 screws (2)
10. To replace the front I/O panel, align the screw holes on the front I/O panel with the screw holes on the chassis, and replace the two screws.
11. Align the securing tabs on the front panel with the corresponding slots on the chassis and connect the FRONT_LED cable to the front panel.
1 front panel
3 securing tabs (4)
12. Rotate the front panel towards the computer until it snaps into place.
13. Replace the drive panel (see
14. Connect the cables to the front I/O panel.
15. Replace the card fan cage (see
CAUTION: Ensure that you replace all the cables originally connected to the master I/O board or your computer may not function properly.
16. Connect all the cables to the master I/O board (see
17. Replace any expansion cards that you removed (see
18. Replace the computer cover (see
19. Connect your computer and devices to electrical outlets, and then turn them on.
Back to Contents Page
2 front I/O panel
2 FRONT_LED cable
Replacing the Drive Panel)
Replacing the Card Fan).
Master I/O Board
Installing PCI and PCI Express
Replacing the Computer Cover).
Components).
Cards).