Dell XPS 625 Service Manual page 21

1 optical drive 2 shoulder screws (3)
8. Gently slide the drive into the drive bay until it clicks into place.
9. Attach the power and data cables to the optical drive.
NOTE: If you disconnected the data cable while removing the optical drive or if you are installing a new optical drive, connect the data cable to the
system board.
To locate the system board connector, see
10. Check all cable connections and fold cables out of the way to avoid blocking airflow between the fan and cooling vents.
11. Replace the drive panel (see
12. Replace the computer cover (see
13. Connect your computer and devices to electrical outlets, and then turn them on.
See the documentation that came with the drive for instructions on installing any software required for drive operation.
14. Enter system setup (see Entering System
Back to Contents Page
System Board Components.
Replacing the Drive Panel).
Replacing the Computer Cover).
Setup) and select the appropriate Drive option.