1
front panel
3
securing tabs (4)
8. Rotate the front panel towards the computer until it snaps into place.
9. Replace the drive panel (see
10. Replace the computer cover (see
11. Connect your computer and devices to electrical outlets, and then turn them on.
Replacing the Rear LED Board
1. Follow the procedures in
Before You
2. Remove the computer cover (see
3. Remove the system board (see
4. Disconnect the REAR_LED_SENSOR cable from the master I/O board (see
5. Gently push the release tab away from the chassis to release the rear LED board and then slide it up and away from the computer.
1
release tab
6. To replace the rear LED board, connect the REAR_LED_SENSOR cable to the master I/O board (see
2
FRONT_LED cable
Replacing the Drive
Panel).
Replacing the Computer
Cover).
Begin.
Replacing the Computer
Cover).
Replacing the System
Board).
2
rear LED board
Master I/O Board
Components).
Master I/O Board
Components).