Configuring Quality of Service
CoS Settings
STEP 1
STEP 2
STEP 3
Cisco RV220W Administration Guide
CoS to DSCP Remarking
Use the QoS > CoS Settings > CoS to DSCP page to map CoS priorities to
Differentiated Services Code Point (DSCP) values. Differentiated Services or
DiffServ is a computer networking architecture that specifies a simple, scalable
and coarse-grained mechanism for classifying and managing network traffic and
providing QoS guarantees.
To open this page: In the navigation tree, choose QoS > CoS Settings > COS to
DSCP.
To enable CoS to DSCP settings, check the Enable box. Otherwise, uncheck the
box. The 802. 1 p Priority section is available only when CoS to DSCP is enabled.
For each 802. 1 p Priority, enter a DSCP value. (Valid values are from 0 to 63).
Click Save to save your settings, or click Cancel to reload the page with the
current settings. To reload the default settings, click Restore Default.
8
154