Cisco Small Business RV220W Administration Manual page 212

Installing the Cisco RV220W
Mounting the Cisco RV220W
WARNING
STEP 1
STEP 2
STEP 3
Cisco RV220W Administration Guide
The dimensions for these parts are as follows:
1
2
1 0.30 to 0.32 in 2 0.86 to 0.88 in
7.7 to 8.2 mm 21.8 to 22.3
mm
Insecure mounting might damage the device or cause injury. Cisco is not
responsible for damages incurred by insecure wall-mounting.
To mount the RV220W to the wall:
Determine where you want to mount the RV220W. Verify that the surface is
smooth, flat, dry, and sturdy. Take into account the dimensions of the RV220W and
allow for 3 inches (76.2 mm) of clearance around it.
For horizontal mounting, drill two pilot holes into the surface 5-7/8 inches (150 mm)
apart. For vertical mounting, drill two pilot holes into the surface 4-1/4 inches
(108 mm) apart.
Horizontal
Wall mount
slots
(Optional) If using drywall anchors, hammer into holes.
3
4
3 0.26 to 0.28 in
6.5 to 7. 1 mm
5-7/8"
Wireless N Network Security Firewall
4 0.61 to 0.63 in
15.5 to 16 mm
Vertical
RV220W
Wall mount
slots
4-1/4"
A
212