Jumper Pin, Antenna, & System Diagrams - CrimeStopper COOLSTART RS-830 Installation Instructions Manual

Jumper pins are used to configure the operation of the on board multi-function output PINK/WHITE wire and the Parking
Light WHITE wire. See the diagram below for Jumper Pin configurations.
CONTROL MODULE
JP1 JUMPERS:
IGN2 / ACC2 / STR2
PINK WHITE
JUMPER PIN & ANTENNA DIAGRAMS
ANTENNA / RECEIVER GUIDE
WINDSHIELD
ACC 2
IGN 2 (DEFAULT)
STARTER 2
(-) NEGATIVE PARKING LIGHT (500 mA)
+12V (10A) PARKING LIGHT (DEFAULT)
JP2 JUMPERS:
PARKING LIGHT
OUTPUT
RECOMMENDED
ANTENNA
LOCATIONS
19
JUMPER
PLUG
SIDE VIEW
JUMPER
PINS
RS-830/810