Char-Broil 463234312 Product Manual page 26

•
Place heat tents over tube burners and the heat tent for sear burner over sear burner by inserting tabs into slots in front of firebox.
14
Opposite ends of heat tents rest on pins in back of firebox.
•
Place cooking grates onto grate rests.
15
•
Insert ends of Warming Rack pivot wire into holes in sides of gril lid. Insert ends of Warming Rack leg wire into holes in sides of
firebox.
NOTE: Pivot and leg wires, running side-to-side, should be under wires running front-to-back. If pivot and leg wires are on top,
Warming Rack is installed upside-down.
•
Unscrew ignitor cap and place AA battery into ignitor slot with positive end (+) facing outward. Screw ignitor cap onto ignitor.
Warming Rack Wires
Pivot Wire
(front-to-back)
(side to side)
Leg Wire
(side to side)
26
Heat Tent
(Black)
Pivot Wire
Heat Tent,
F/Sear Burner
(Stainless Steel)
Sear Burner
-
+
+
–
AA Battery
Warming Rack
Leg Wire
Cooking Grate