Samsung SCV-2081R User Manual page 28

setup
SYNC : In areas where the supply is
at 60Hz(NTSC), 50Hz(PAL), you can
synchronize the output phase of multiple
cameras using the power synchronization
function (Line-Lock) without using a
synchronization signal generator.
- INT : Internal Synchronization Type
- LL : Power Synchronization Type, Line-lock
• Press the Function Setup switch.
• You can select a desired phase from 0 to 359 when select 'phase'.

M
When using AC power at 60Hz(NTSC), 50Hz(PAL) frequency, you can use the LL type
synchronization.

When the power is DC 12V, the SYNC menu is fi xed to the 'INT' mode.
MOTION DET :
This product has a feature that allows
you to observe movement of objects in
8 different areas on the screen, and the
words 'MOTION DETECTED' appear on
the screen when movement is detected.
You can monitor activity more effi cient.
When the SPECIAL menu screen is
displayed, press the Function Setup
switch so that the arrow indicates
'MOTION DET'.
Set up the mode using the Function Setup switch.
- SENSITIVITY :
You can select up to 8 MD areas. When SENSITIVITY number is
high, motion detection sensitivity is increased to recognize even small
movement.
- AREA MODE : Determines whether to use the MD area selected in SENSITIVITY.
- SEL POS : Determines which of the 4 vertices of each MD area is to be
- XPOS : Determines the coordinate of the horizontal axis for SEL POS.
- YPOS : Determines the coordinate of the vertical axis for SEL POS.
- FILL SET : Fills in a selected MD area. The color of fi lling is sequentially
28_ setup
used.
selected as brown, orange, blue, cyan, yellowish green, yellow,
magenta and red.
SYNC
PHASE
Press SET to Return
MOTION DET
1.SENSITIVITY AREA1
2.AREA MODE
3.SEL POS L_TOP
4.XPOS
5.YPOS
6.FILL SET
7.RETURN
0
ON
3
5