Samsung SCV-2081R User Manual page 22

setup
BACKLIGHT
This camera is designed so that it delivers a distinctive subject and background at
the same time, even when the subject is in backlight, unlike conventional cameras, by
adopting a proprietary W-V DSP chip.
1. When the SETUP menu screen is displayed,
select 'BACKLIGHT' by using the Function
Setup switch so that the arrow indicates
BACKLIGHT .
2. Select a desired mode using the Function Setup
switch depending on the camera purpose.
BLC : Enables a user to directly select a
desired area from a picture, and to
view the area more clearly.
- LEVEL : Adjust level of the BLC function.
- TOP/BOTTOM/LEFT/RIGHT :
Adjust the area to be enhanced.
HLC (High Light Compensation) :
This function masks the strong light to minimize white out due to over exposure and
preserve much of the on-screen details when the camera aims a strong light source.
- LEVEL : Adjusts the brightness level of a
monitoring area.
- LIMIT : Enable to change the operating
condition.
- MASK COLOR/TONE :
Change the color / brightness of the masking
area. (Black, Red, Blue, Cyan, Magenta)
- TOP/BOTTOM/LEFT/RIGHT :
Adjust the area to be enhanced.
OFF : Not being used
3. Select a desired mode using the Function Setup switch and press the switch.

M
Because there can be a difference in the effectiveness of HLC according to the amount of light
area in the screen, optimize the installation angle for the best HLC performance.

In a dark environment, the HLC is only activated when a high light that is larger than a certain area
is present.
22_ setup
MAIN SETUP
1.LENS DC
2.EXPOSURE
3.WHITE BAL ATW
4.SSDR OFF
5.BACKLIGHT OFF
6.SSNR3 ON
BLC SETUP
LEVEL MIDDLE
TOP
BOTTOM 109
LEFT
RIGHT 121
Press SET to Return
HLC SETUP
LEVEL MIDDLE
LIMIT NIGHT ONLY
MASK COLOR BLACK
MASK TONE
TOP
BOTTOM 120
LEFT
RIGHT 172
Press SET to Return
38
54
1
5
5