Samsung SCV-2081R User Manual page 19

s
r
on
s
EXPOSURE
1. When the SETUP menu screen is displayed,
select EXPOSURE by using the Function
Setup switch so that the arrow indicates
'EXPOSURE'.
2. Select a desired mode using the Function
Setup switch.
BRIGHTNESS : Adjusts the video brightness.
SHUTTER : You can select shutter mode.
- ESC : Select this to control the shutter
speed automatically. If ESC
is selected, the shutter speed
is automatically controlled
depending on the ambient
illumination of the subject.
- MANUAL : You can control shutter speed manually.
(NTSC MODEL : 1/60~1/120,000, PAL MODEL : 1/50~1/120,000)
- A.FLK : Select this when you experience picture fl icker, this happens when
there is a clash with the installed lighting frequency.
- ---: Shutter speed is fi xed at 1/60sec(1/50sec).

M
When the SHUTTER is set to ESC after selecting the Internal Synchronization Type, the picture may
become unstable if the camera faces a bright fl uorescent light. Therefore, take care when choosing
the installation position.

When the SHUTTER is set to MANUAL or A.FLK mode, SENS-UP will be disabled.

Set the shutter mode to --- if color rolling occurs.
AGC (AUTO GAIN CONTROL) : The higher the gain level, the brighter the screen
- OFF : Deactivates the AGC function.
- LOW : Allows automatic gain control from 5.3dB to 32dB.
- HIGH : Allows automatic gain control from 5.3dB to 37dB.
1.LENS
2.EXPOSURE
3.WHITE BAL
EXPOSURE SETUP
1.BRIGHTNESS
2.SHUTTER
3.AGC
4.SENS-UP
5.RETURN
but the higher the noise.
MAIN SETUP
DC
ATW
25
---
HIGH
OFF
English_19