Samsung SCV-2081R User Manual page 20

setup
SENS-UP : When it is night or dark, the
camera automatically detects the
light level and maintains a clear
picture if this mode is activated.
- OFF : Deactivates the SENS-UP function.
- AUTO : Activates the SENS-UP function.
RETURN : Select this to save the changes in the EXPOSURE menu and return to
the SETUP menu.

M If you set the Function Setup switch to 'AUTO' mode, You can adjust the brightness by
increasing or decreasing the shutter speed. (x2 ~ x512)

Note that the higher the SENS-UP level, the brighter the screen, but the more likely it is that an
after-image will appear.

Although Noise, Spots, and Whitish symptoms may occur in SENS-UP operation when the
sens-up level is increased, this is normal.
WHITE BAL (WHITE BALANCE)
Use the White Balance function to adjust the screen color.
1. When the SETUP menu screen is displayed,
select 'White Bal.' by using the Function
Setup switch so that the arrow indicates
'White Bal.'.
2. Select a desired mode using the Function
Setup switch.
Select one of the following 5 modes, as appropriate for your purpose.
ATW : Select this when the color temperature is between 1,700°K and 11,000°K.
OUTDOOR : Select this when the color temperature is between 1,700°K and
11,000°K.(sodium light inclusion)
Select this When the color temperature of environment surrounding
the subject is out of the control range (e.g. clear sky, or sunset)
INDOOR : Select this when the color
temperature is between 4,500°K
and 8,500°K.
MANUAL : Select this to fi ne-tune White
Balance manually. Set White
Balance fi rst by using the ATW
or AWC mode. After that switch to MANUAL mode, fi ne-tune the White
20_ setup
LIMIT
AUTO
Press SET to Return
MAIN SETUP
1.LENS DC
2.EXPOSURE
3.WHITE BAL ATW
4.SSDR OFF
WB MANUAL
RGAIN 529
BGAIN 532
Press SET to Return
x2