Cisco Video Surveillance 2621 IP Dome User Manual page 92

Viewing Video through the Home Window Overview
Table 4-1
Control
Microphone Off
toggle button
Microphone On
toggle button
Microphone
Sensitivity slider
Snapshot controls
Snapshot button
Snapshot Root
Folder button
IP camera controls
Stream Option
Alarm Output On
button
Alarm Output Off
button
Cisco Video Surveillance System 2621 IP Dome User Guide
4-4
Home Window Controls (continued)
Description
Click the Microphone Off button to mute the audio stream that is captured and
sent to the IP camera from the internal or external microphone of the PC that you
are using. When you click this button, the speaker that is attached to the IP camera
does not play audio that is transmitted from your PC.
Note If you are simultaneously accessing other IP cameras in different browser
sessions on the same PC, clicking this button in one browser session does
not mute the audio that the PC sends to the other IP cameras.
When you click the Microphone Off button, it changes to the Microphone On
button. Click the Microphone On button to unmute audio that is sent to the IP
camera. The button changes to the Microphone Off button.
These buttons appear if half-duplex or full-duplex is enabled for audio. For
information about enabling half-duplex or full-duplex, see the
section on page 3-23.
Appears to the right of the Microphone On button or Microphone Off button if
audio is enabled for the IP camera. Use this slider to adjust the gain of the PC
microphone (that is, how sensitive it is to the audio that it picks up and that is sent
to the IP camera).
Captures and saves a snapshot image of the current video image in the format and
location of your choice, and with the file name of your choice.
When you click this button, follow these steps to save the image:
In the Snapshot window, click Save.
1.
In the Save Picture As window, enter the path and folder for the image, the file
2.
name for the image, and the format (BMP or JPG) for the image, then click
Save.
Specifies the root folder where snapshot images are to be saved. Click this button
to choose the root folder.
Selects the mode that the IP camera uses for video streaming. The options depend
on the configuration of the Streaming Mode option in the in the Video window.
For related information, see the
Changes the state of the designated IP camera output port (1 or 2) as defined by
the Definition Mappings option in the I/O Ports window.
For information about the Definition Mappings option, see the
Window" section on page
Changes the state of the designated IP camera output port (1 or 2) as defined by
the Definition Mappings option in the I/O Ports window.
For information about the Definition Mappings option, see the
Window" section on page
"Video Window" section on page
3-35.
3-35.
Chapter 4 Viewing Live Video
"Audio Window"
3-16.
"Alarm I/O Ports
"Alarm I/O Ports
OL-24129-02