Cisco Video Surveillance 2621 IP Dome User Manual page 17

Chapter 2 Getting Started
Figure 2-2
1 Base plate
2 Camera unit
3 Camera unit screws (2)
4
Privacy shield
5 Dome assembly
6 TORX screws (3)
Step 2 Remove the Privacy shield by squeezing it inward to release it from the four tabs that hold it into place
(see Figure
Remove the camera unit from the base plate by using a Phillips-head screwdriver to unscrew the two
Step 3
camera unit screws and pressing the tabs that lock the camera unit to the base plate (see
Attach the base plate to the junction box using four 8-32 x 3/8-inch screws (see
Step 4
OL-24129-02
Disassembling the 2621 IP Dome Components
1
2
3
4
5
6
2-2).
Installing the Cisco Video Surveillance 2621 IP Dome
Cisco Video Surveillance System 2621 IP Dome User Guide
Figure 2-2).
Figure 2-3).
2-5