Recording (Dubbing) Images On Other Video Devices - Hitachi DZ-MV730A Instruction Manual

RECORDING (DUBBING) IMAGES ON OTHER VIDEO DEVICES

You can record (dub) images played back on this DVD video camera/recorder, on other video
devices.
Use the AV/S input/output cable (provided) to connect the DVD video camera/recorder to another
video device as shown in the following figure:
AV/S input/output cable
(provided)
* If the video device to be connected has an S-VIDEO input jack, you can connect it to the DVD video camera/
recorder.
1
Press the DISC NAVIGATION button.
2
Select a scene to be played back.
3
Set the channel of the connected video device
to an external input.
4
Press the playback (A) button on this DVD
video camera/recorder and the record button
on connected device: The DVD video
camera/recorder will start playback and the
recorded device will record (dub) it.
Signal flow
To AV input/output jack
To S-VIDEO
input jack of
*
VCR, etc.
Yellow
:
Note
• Using an S-VIDEO jack will deliver clearer images.
• Audio is heard from the speaker: If the volume is too
high, noise may enter the dubbed image.
• It is recommended that you use Disc Navigation to
create a play list including the scenes to be dubbed
among the scenes recorded on this DVD video
camera/recorder (p. 124).
• Be sure to use the AC adapter/charger to power the
DVD video camera/recorder from AC outlet, to prevent
battery power from shutting off during recording on
another video device.
• If you are using a Hitachi VCR, using the remote
control provided with this DVD video camera/recorder
may operate the VCR. To record (dub) images from
the DVD video camera/recorder to Hitachi VCR,
change the remote control code of VCR to a position
other than "VCR2".
To video/audio
input jacks
White
Red
83