Hitachi DZ-MV730A Instruction Manual page 165

Hitachi dz-gx20a / dz-mv730a / dz-mv780a instruction manual
Hide thumbs Also See for DZ-MV730A:
Table of Contents

Advertisement

Message
There was no scene
which can be deleted.
This card cannot be
used.
Please replace card.
This disc cannot be
used. Please replace
disc.
This disc is recorded by
the PAL system. Please
replace disc.
Top scene cannot be
divided.
UNFORMAT DISC
Use AC adapter/
charger.
Use AC adapter/
charger.
Turn off power.
VIDEO scene cannot be
copied to card.
Write protected.
Check card.
Write protected.
Check disc.
Cause & Troubleshooting
This message will appear if you try to delete multiple scenes on
Disc Navigation when all the selected scenes have been locked.
Release the lock on scenes before executing deletion.
The card cannot be used in this DVD video camera/recorder: Use
another card.
A disc that cannot be used on this DVD video camera/recorder
has been loaded. Check the type of disc.
This DVD video camera/recorder can use only discs recorded on
the NTSC system. A disc recorded on the PAL system cannot be
used on this DVD video camera/recorder.
Division is not possible at the start of scene.
The disc is not initialized or it is damaged.
If this message appears, be sure to initialize the disc on this DVD
video camera/recorder before using it.
Reinitializing even a disc used on this DVD video camera/
recorder may be necessary (initializing will erase all recorded
contents on disc). If this message appears, try to initialize the
disc. If the same message still appears, the disc may be
damaged: Use another disc.
See *2 on page 166.
Finalization is not possible when the DVD video camera/recorder
is powered by a battery: Use the AC adapter/charger for
finalization.
Scene cannot be repaired when the DVD video camera/recorder
is powered by a battery.
If the AC adapter/charger is unavailable in handy place, remove
the disc, use the opposite side, or use another disc. To repair the
removed disc, insert the disc into the DVD video camera/recorder
afterwards, and connect the AC adapter/charger.
No movie can be copied to card.
Select stills and copy them to card.
A card with the erase prevention switch locked is inserted: Unlock
the switch.
• A write-protected disc is inserted.
• Release the write-protect using the Disc Navigation menu.
Reference
page
110, 118
27
25
112
132
26
43, 135
43
117
27
133
165

Advertisement

Table of Contents
loading

Table of Contents