Reinitializing The Hub - Equinox Systems ESP-2 OPTO Installation And User Manual

4.14 Reinitializing the Hub

The Initialize operation resets all configurable values to their factory defaults,
including the IP address and password.
To reinitialize:
1. Click Re-initialize from the Main Menu.
2. Click the Re-initialize button.
After the reinitialization and reboot, the web interface will try to reconnect to the hub,
using the predefined IP address (192.1.1.1). If this fails, or if the web interface does not
return within 30 seconds, direct your browser to the predefined IP address (192.1.1.1).
You may also reinitialize the ESP-2 serial hub using the configuration utility (see
Reinitializing the Hub on page 30) or the INIT button on the front panel (see
Reinitializing on page 8).
Equinox ESP-2 OPTO Serial Hub Installation and User Guide 23