Table of Contents
Advertisement
Table 16: Port Statistics Display
Item
Status
Destination IP Address
Receive Bytes
Transfer Bytes
Signals
Baud rate/Size/Parity
Frame/Parity/Overrun
To display port statistics:
Select Port Statistics from the Main Menu.
4.12 Displaying Connection Status
The Connection Status display has two sections: Serial Port Active Connection Status
and Port Redirection Connections. This display refreshes every five seconds.
The Serial Port Active Connection Status section includes the information described
in Table 17 for each serial port.
Table 17: Serial Port Active Connection Status Display
Item
Serial Connection Method
Destination IP Address
Bytes Received
Bytes Transmitted
Connect Time
Inactivity Timeout
Time Remaining
Equinox ESP-2 OPTO Serial Hub Installation and User Guide
Description
Port status flags.
IP address of the server that has the port open.
Number of bytes received.
Number of bytes transmitted.
Current value of the RS-232 signals (should be empty, indicating all
signals are logically low).
Baud rate, data size (5-8 bits), parity (N=none, O=odd, E=even,
M=mark or S=space) and number of stop bits (1 or 2).
Number of framing errors, parity errors and overruns.
Description
Connection method is serial port redirection, Telnet server, TCP
server, TCP client, configuration utility or idle.
IP address of the remote server.
Number of bytes received from the serial port since the current
connection session was established.
Number of bytes transmitted on the serial port since the current
connection session was established.
Number of days, hours, minutes and seconds that the current
connection has been established.
Number of minutes and seconds in the configured inactivity time-
out value for this session. If no time-out was configured, this field
indicates disabled.
Number of minutes and seconds remaining until the inactivity
time-out occurs. If no time-out was configured, this field indicates
not applicable.
21
Advertisement
Table of Contents
