Basic Operation; Power On/Off - Hitachi 32LD8800TA User Manual

BASIC OPERATION

Power On/Off

Now, turn On the main power of the unit. Make sure that the Power Cord
has plugged into the wall socket.
To turn On the power of the monitor:
1. Press the Main Power switch on the monitor.
The Indicating Lamp will illuminates in Red (Standby mode).
2. Press Sub Power button either on the control panel or on the remote
control.
The color of the Indicating Lamp turns into Green, and the image will
display on the screen.
To turn Off the power of the monitor:
1. Press Sub Power button either on the control panel or on the remote
control.
The image disappears from the screen and the Indicating Lamp turns
into Red (Standby mode).
2. Press Main Power switch to completely turn Off the power of the unit.
Indicating Lamp
Status
Off
Red
Green
Orange
* About Power Save mode, see "Power Save Mode" and "When Following Messages Appear on the Screen" on
for details.
54
and
NOTE
If the image does not appear on the screen at all, or have any problem, see TROUBLESHOOTING on
may help you to solve the problems.
You can turn ON the power only by pressing the Sub Power button during the Standby mode.
Do not switch the power On/Off repeatedly in a short period of time. It could cause malfunction.
To avoid sudden surges of electricity when the power comes back on, turn Off the main power of the unit before you
leave if there is a blackout during use of the unit.
LD8800TA-8ｔｈ-P1-P24.indd 18 LD8800TA-8ｔｈ-P1-P24.indd 18
The Indicating Lamp Status Check
Power Status
Off
Standby mode
On
Power Save mode*
Main Power switch (on the bottom surface)
Sub Power button
Power Switch Status
Main power → Off
Main power → On
Sub Power button → Off
Main power → On
Sub power button → On
Main power → On
Sub Power button → On
Sub Power button
SD MEMORY
CARD
PUSH-EJECT
P
P
OK
PH35814
52
. It
54 ~ 56
18
2005/11/09 9:54:58 2005/11/09 9:54:58