Setup Menu (Rgb Mode) - Hitachi 32LD8800TA User Manual

MENU OPERATION (continued)

Setup Menu (RGB mode)

With this menu, you can adjust the display condition of the image which is inputting from the RGB terminals.
By pressing ▼button at the bottom of the 1st Setup menu page, the 2nd Setup menu page will appear on the screen.
Selected Items
Auto Adjust
Horizontal Position*
Vertical Position*
Horizontal Clock*
Clock Phase*
Reset
25
LD8800TA-8ｔｈ-P25-P39.indd 25 LD8800TA-8ｔｈ-P25-P39.indd 25
Setup
Auto Adjust Adjust
Horizontal Position 0
Vertical Position +31
Horizontal Clock –20
Clock Phase 10
Reset Reset
Select Return Exit
Adjust Horizontal Position, Vertical Position, Horizontal
Clock, and Clock Phase automatically.
Press button to start auto adjustment.
OK
The message "Auto Adjusting" is displayed.
Depending on the type of the signal, there is a possibility
that the display may not be adjusted in its optimum
condition with this function. In that case, please adjust
each item manually.
Adjust the display position horizontally.
-63~+63 When the position exceeds the possible range, the
display color will turn into Magenta.
Adjust the display position vertically.
-31~+31 When the position exceeds the possible range, the
display color will turn into Magenta.
-31~+31 Minimize the vertical stripes on the screen.
Minimize the blurring of the letters and stripes on horizon-
tal row.
0~63
Make sure to adjust Horizontal Clock fi rst before
adjusting Clock Phase.
Reset all the set values on this Menu page to original fac-
tory settings.
Setup
Input Level 0.7V
Frequency Display Off
WVGA Type Off
WXGA Mode Off
Vertical Filter On
Frequency Mode PC
Select Set Return
Setup hint
2005/11/08 15:43:18 2005/11/08 15:43:18