Telrad Avanti 3020 User Manual page 33

the contents of the memory. Calls are forwarded to
the contents of the MEMORY button or SPEED
DIAL bin. If you change the contents of the SPEED
DIAL bin, calls are forwarded to the new destina-
tion. This does not apply to the MEMORY button.
6. Hang up.
To cancel call forwarding (Avanti 3020)
1. If your set does not have DN buttons, skip to step 2.
If you want to cancel forwarding for a specific DN, first
press the desired DN button.
2. Press [#].
3. Press {CALL FWD} .
4. Press {CALL FWD} , {BUSY} , or {NOANS} .
5. Press {ALL} , {INT} , or {EXT} , depending on the kind of
call forwarding you want to cancel.
6. Hang up.
To program call forwarding (Avanti 3015D)
1. If your set does not have DN buttons,
I
f you want to program forwarding for a specific DN, first
press the desired DN button.
If more than one set with a button for the same DN is
authorized to forward calls for that DN, the last pro-
gramming performed overrides the previous.
2. Press [FEATURE] and dial the code that designates in
which situation you want your calls forwarded:
In order to program
Call forward always
Call forward busy
Call forward no answer
3. If you have a set in PBX mode and are authorized to do
so, you can program call forwarding for all your DNs at
once. Press [*].
26
Dial
[F][L] or [3][5]
[F][B] or [3][2]
[F][N] or [3][6]
Avanti 3020 and Avanti 3015D sets
skip to step 2.