Installing The Input Output (I/O) Board; Removing The Hard-Drive Support Plate - Dell Latitude E6430 ATG Owner's Manual

4. Remove the I/O board from the computer.

Installing the Input Output (I/O) Board

1. Place the I/O board in its compartment.
2. Tighten the screws to secure the I/O board.
3. Install:
a) system board
b) ExpressCard cage
c) media board (available in E6430/E6430 ATG only)
d) palmrest
e) display assembly
f) keyboard
g) keyboard trim
h) bluetooth card
i) hard drive
j) optical drive
k) base cover
l) battery
4. Follow the procedures in

Removing the Hard-Drive Support Plate

1. Follow the procedures in
2. Remove:
a) battery
b) base cover
c) hard drive
d) bluetooth card
e) keyboard trim
f) keyboard
g) display assembly
h) palmrest
i) media board
j) ExpressCard cage
k) system board
40
After Working Inside Your Computer .
Before Working Inside Your Computer .