Installing The Input/Output Board; Removing The Speakers - Dell Vostro 15-3561 Owner's Manual

Installing the Input/Output board

1. Connect the input/output (I/O board) cable to the I/O board.
2. Replace the black adhesive tape to secure the i/o board cable.
3. Turn the I/O board over and align it with the screw holder on the computer.
4. Insert the I/O board into the computer.
5. Tighten the screw to secure the I/O board to the computer.
6. Install the:
a. base cover
b. keyboard
c. optical drive
d. battery
7. Follow the procedure in

Removing the speakers

1. Follow the procedure in
2. Remove the:
a. battery
b. optical drive
c. keyboard
d. base cover
3. To remove the speakers:
a. Disconnect the speaker cable [1].
b. Unroute the cables and remove the speakers from the computer [2].
After working inside your
Before working inside your
computer.
computer.
Removing and installing components 23