Useful Functions; Reception Band Switching; V-V/U-U Simultaneous Reception - Alinco DR-620T Instruction Manual

Useful functions

Reception band switching

This is to Select the receiving band. On the VHF side, FM broadcasting can be received. While in
the VFO mode.
1.
After pressing the FUNC key, press the CALL
key while [F] icon is on.
On the VHF side, the band switches from
144MHz band to the FM broadcasting band.

V-V/U-U simultaneous reception

This is to receive the same frequency band simultaneously both on the MAIN band and the SUB
band, while in the VFO mode.
1.
After pressing the FUNC key, press the BAND
key while [F] icon is on.
Display on the SUB band changes to the same
frequency band as the MAIN band.
The default frequency of the SUB band is the
VFO default frequency.
2.
To change the frequency or settings of the SUB
band, switch the SUB band to the MAIN dis-
play by pressing the BAND key before opera-
tion.
3.
By pressing the BANDs key after pressing the
FUNC key again, the display will return to the
normal V-U display.
NOTE: If you switch BANDs while having FM broadcasting band on the MAIN side, the display will show
the [SUB] icon.
At this time, the MAIN band will be exclusively for reception and the radio will not transmit.
When the [SUB] icon is on the display, memory programming is not possible.
34
When V-V/U-U is set
SUB
In this case no transmission is possible
on the MAIN band