Technical Data - Wolf Garten Accu 60 Instruction Manual

Maintenance
Replace batteries
1. Remove cover (figure L)
Place a coin in the cover slot and press
in the direction of the blade (1). Remove
the cover from above (2).
2. Replace batteries (figure M)
Remove both plugs from the batteries
(3); remove the batteries from the
shears. Place the new batteries in the
shears and connect the two plugs.
Spare parts
Order description
C-TS
Telescopic handle
ccu 8 EM
Shear blade
ccu 10 EM
Shear blade
ccu BS EM
Shrub blade
C-R
Replacement blades
ccu
Charger

Technical Data

Noise measurement at operator ear
level in accordance with EN 836.
Vibration measured at the handle
with operator according to EN 1033.
The assessed acceleration typically
amounts to:
16
Item number. Product information
Continuously adjustable from 85-120 cm.
7095 000 Result: convenient trimming without stooping.
( ccu 60, 80, 100, BS 80)
7084 095 Cutting width 80 mm ( ccu 60, 80, 100, BS 80)
7085 095 Cutting width 100 mm ( ccu 60, 80, 100, BS 80)
7095 095
Length 170 mm ( ccu 60, 80, 100, BS 80)
Result: The wheels achieve a consistent cutting height
7084 094
( ccu 60, 80, 100)
7084 916
7085 916
7086 916
7086 078
ccu 60
Lp = 72 dB
( )
< 2,5 m/s
3. Fastening the cover (figure N)
Push the lid with the projection (4) under
the edge of the shears and then press
the cover on the shears (5).
Note: Please
protrudes from the shears when fastening
the cover!
ccu 60
ccu 80
ccu 100, BS 80
ccu 60, 80, 100, BS 80
ccu 80
Lp = 72 dB
( )
< 2,5 m/s
2 2
ensure that no
ccu 100 ccu BS 80
Lp = 72 dB Lp = 72 dB
( ) ( )
< 2,5 m/s < 2,5 m/s
2
cable
2