Initial Settings
SWITCHING OPERATING SOUND ON OR OFF (BEEP)
This DVD video camera/recorder will emit sound when the power switch is changed over, the REC button
is pressed, or other operations are engaged. If you do not need operating sound, you can switch it off.
Setting
On
Beep is heard
Off
No beep is heard
1
Press the MENU button,
choose "Beep" on the
"Initial Setup" menu
screen, and then press the
button.
TURNING DVD VIDEO CAMERA/RECORDER OFF AUTOMATICALLY
(POWER SAVE)
This DVD video camera/recorder is equipped with power save function. Specify "Power Save: On": If the
DVD video camera/recorder is left in the recording pause status without being operated for 5 minutes,
it will automatically turn off to prevent the battery from discharging needlessly.
Setting
On
To engage power save
Off
To cancel power save
1
Press the MENU button,
choose "Power Save" on
the "Initial Setup" menu
screen, and then press the
button.
2
Select "On" or "Off", and
then press the
button.
3
Press the MENU button to end the setting.
92
Content
I n i t i a l S e t u p
Be e p
On
Po w e r S a v e
Of f
R e c o r d LED
L a n g u a g e
Demo Mode
Reset
ENTER
RETURN
RAM
Content
I n i t i a l S e t u p
Be e p
Po w e r S a v e
On
R e c o r d LED
Of f
L a n g u a g e
Demo Mode
Reset
ENTER
RETURN
RAM
2
Select "On" or "Off", and then press the
button.
3
Press the MENU button to end the setting.
:
Note
The "Beep" setting will be stored in memory even when the
DVD video camera/recorder is turned off.
:
Note
•
To turn the DVD video camera/recorder on again from
automatic off activated by the power save function, set
the power switch to "POWER OFF", and then set it to "
VIDEO", "
PHOTO" or "
•
The Power Save setting will not appear in the on-screen
information display.
•
The Power Save setting will be stored in memory even
when the DVD video camera/recorder is turned off.
PHOTO"